Programming a button press with VB and your @Netduino, Event handlers and interrupt ports. In this tutorial I show how to program the Netduino to light up the onboard LED when the button is pressed, I then go into event handlers and latching buttons.
Netduino VB Tutorial 1 Blink
This is the first in a series of tutorials on programming the Netduino with Visual Basic or VB. You can program the netduino with either C# or VB but VB is now my language of choice.
Netduino VB Programming Environment Setup
Programming your Netduino with C# is fine and all, however, I am not going to do it any more. It is super easy to make the switch to a more forgiving programming language by the name of Visual Basic or VB.
Netduino FIrmware Upgrade Tutorial
In order to upgrade or replace the firmware in your Netduino you will need to download some software first.
Netduino Tutorial, Knob and Sweep
In this video I show how to connect a servo to a Netduino and also how to program the servo library into a new solution. The sweep program will drive the arm of the servo back and forth while the Knob program will move the arm of the servo when you turn a potentiometer.